Dead load test Fantazzi scale LOFT LADDERS - standard UNI EN 14975:2006
| Preload Kg. 100 | Mean Load Kg. 160 | Mean Applied Load Kg. 260 (standard UNI EN 14975:2006) | |
|---|---|---|---|
| Application t (2) | t=60 seconds | t=60 seconds | t=60 seconds |
| Dimensional Check | Conforme (Compliant 2 UNI EN 14975:2006) |
Conforme (Compliant 2 UNI EN 14975:2006) |
Conforme (Compliant 2 UNI EN 14975:2006) |
| Welding State (1) | No detectable alteration | No detectable alteration | No detectable alteration |
| Spring State | No detectable alteration | No detectable alteration | No detectable alteration |
| Bracket State | No detectable alteration | No detectable alteration | No detectable alteration |
| The Rods | No failure | No failure | No failure |
| Rung State | No detectable alteration | No detectable alteration | Slight rung distortion.No faliure or yield reported |
| Folder Ladder Pack State | No detectable alteration | No detectable alteration | No detectable alteration |
| ACI SVEZIA Mod. ACI ALLUMINIO MOTORISED LADDER Mod. ACI TRE Mod. ACI QUATTRO Mod. |
Withstands | Withstands | Withstands |
(2) = Application time of the kg. 100 preload, t=60 seconds as per UNI EN 14975:2006
(2) = Application time of the kg. 160, t=60 seconds as per UNI EN 14975:2006
(2) = Application time of the kg. 260, t=60 seconds as per UNI EN 14975:2006
(2) = For load tests approved weights were used, weighing kg. 20 each.
(2) = Max load tested on the middle rung: kg. 260
(1) = Welders' qualifications: ref. EN 287-1 ed EN 287-2 (manual procedures)
(1) = Welding operators' qualifications: rif. EN 1418 (automated procedures)
(1) = Welders' and welding operators in compliance with EN standards EN.
(1) = Rif. to standards on welding procedures: EN 15614-1 (steel) ed EN 15614-2 (aluminium)